Description
PP 39854 - Tek-Mate Female Snaps, 18 in x 24 in
PP 39854 - Tek-Mate Female Snaps, 18 in x 24 in
- Portable ESD worksurface that can also be used to transport populated but unsoldered circuit boards
- Static dissipative foam (RTT 10E6 - 10E7 ohms) laminated to Protektive Pak® corrugate
- Foam is shuntable so board leads can be kept at equipotential
- Includes 10mm (3/8") female grounding snap
- Lightweight, thin, yet durable
- Fits most transportation carts
- Impregnated corrugated material; greater durability than coated or printed material.
- Static dissipative surface resistance of 1 x 106 to < 1 x 109 ohms per ANSI/ESD STM11.11
- Buried shielding layer minimizes sloughing and rub-off contamination.
- Made from 100% recycled material, and is 100% recyclable
Product ID : 39858
Size : 23-1/2 in x 35-1/2 in x 1/16 in
Specifications for Corrugated Material :
Electrostatic Decay : 0.01
seconds at 72°F and 11.8% R.H.
Surface Resistance : 10E6 - 10E8 ohms/sq. after 11 days at 68°F and 12% R.H. for surface. 10E3 - 10E4 ohms/sq. for buried shielding layer
High-Voltage Discharge Resistance : Failure rate 0/5 (no oxide damage in five consecutive tests)
Static Shielding : 99.9% attenuation at 10kV; 99.6% attenuation at 30kV
Charged Device Model (CDM) Safety : RTG >10E7 ohms at 86% R.H. or less
Corrosivity : Contains 1-3 ppm reducible sulfur
Sloughing Test : Negligible surface damage at 10 cycles and <5% of surface damage at 200 cycles in Taber Abrasion Test. No conductive particles abrased from surface
Recyclability : Complete recyclability of package
Biodegradability : Biodegradation in or on moist soil
Volume Conductivity : Conductivity from wall to wall as well as across surface to assure permanence of the antistatic property
Shelf Life : Indefinite
Specifications for Foam :
Density : Surface Resistivity : Corrosivity : TS 1021BA (UK MOD) Pass
Water Extract : TS 1021BA (UK MOD) Pass
Total Chlorine : TS 1021BA (UK MOD) Pass
Recommended Operating Temperature Range : Internal +200°F to -95°F
Tear Strength : 14 lbf/in
Tensile Strength : 44 psi
Size : 23-1/2 in x 35-1/2 in x 1/16 in
Specifications for Corrugated Material :
Electrostatic Decay : 0.01
seconds at 72°F and 11.8% R.H.
Surface Resistance : 10E6 - 10E8 ohms/sq. after 11 days at 68°F and 12% R.H. for surface. 10E3 - 10E4 ohms/sq. for buried shielding layer
High-Voltage Discharge Resistance : Failure rate 0/5 (no oxide damage in five consecutive tests)
Static Shielding : 99.9% attenuation at 10kV; 99.6% attenuation at 30kV
Charged Device Model (CDM) Safety : RTG >10E7 ohms at 86% R.H. or less
Corrosivity : Contains 1-3 ppm reducible sulfur
Sloughing Test : Negligible surface damage at 10 cycles and <5% of surface damage at 200 cycles in Taber Abrasion Test. No conductive particles abrased from surface
Recyclability : Complete recyclability of package
Biodegradability : Biodegradation in or on moist soil
Volume Conductivity : Conductivity from wall to wall as well as across surface to assure permanence of the antistatic property
Shelf Life : Indefinite
Specifications for Foam :
Density : Surface Resistivity : Corrosivity : TS 1021BA (UK MOD) Pass
Water Extract : TS 1021BA (UK MOD) Pass
Total Chlorine : TS 1021BA (UK MOD) Pass
Recommended Operating Temperature Range : Internal +200°F to -95°F
Tear Strength : 14 lbf/in
Tensile Strength : 44 psi