Protektive Pak 47120 - Shop Traveler, Clear, 3 Mil 9-1/2 x 11 OD, 8.625 x 11 ID, 100 per Pack
Description
Protektive Pak 47120 - Shop Traveler, Clear, 3 Mil 9-1/2 x 11 OD, 8.625 x 11 ID, 100 per Pack
Protektive Pak 47120 - Shop Traveler, Clear, 3 Mil 9-1/2 x 11 OD, 8.625 x 11 ID, 100 per Pack
- Lead-free RoHS compliant
- Appropriate for use in Lead-Free work areas
- RTT: <10E11 ohms
- Meets S20.20 and Packaging ESD S541 standards
- Integral static dissipative properties
Product ID : 47120
Thickness: 3 mmOutside Dimensions: 9.5" x 11" with opening
Electrical Properties :
Electrostatic Decay : < 0.05 sec. per FTMS 101C, Method 4046
Surface Resistance : <10E11 Ohms per ANSI-ESD S11.11
ElectroStatic Charge Generation : < 50 volts per EIA-541
Specifications :
Corrosivity : Negligible per FTMS 101C-3005
Elongation @ Break : 500-800% per ASTM D882
Ball Burst Impact Strength : 20-30 cm/kg per ASTM D-3420
Transparency : >90% per ASTM D-1003
Puncture Resistance : >10 lbs average per FTMS 101C-2065
Coefficient of Friction : 0.3 Kinetic, Film to Film per ASTM D-1894
Tensile strength : MD 5,700 psi per ASTM D-882, TD 6,500 psi
Tear strength : MD 3.0 lbs per ASTM D-1004, TD 2.2 lbs
Chemical Properties :
Corrosion : No effect on aluminum, copper, silver, Sn-Pb coated foil, stainless steel, low carbon steel
Polycarbonate Compatible : Yes
No Amines or N-Octanoic Acid : Not present
Heat Sealing Conditions :
Temperature : 375-400°F
Time : 0.5 - 4.5 seconds
Pressure : Minimum 60 PSI
Thickness: 3 mm
Electrical Properties :
Electrostatic Decay : < 0.05 sec. per FTMS 101C, Method 4046
Surface Resistance : <10E11 Ohms per ANSI-ESD S11.11
ElectroStatic Charge Generation : < 50 volts per EIA-541
Specifications :
Corrosivity : Negligible per FTMS 101C-3005
Elongation @ Break : 500-800% per ASTM D882
Ball Burst Impact Strength : 20-30 cm/kg per ASTM D-3420
Transparency : >90% per ASTM D-1003
Puncture Resistance : >10 lbs average per FTMS 101C-2065
Coefficient of Friction : 0.3 Kinetic, Film to Film per ASTM D-1894
Tensile strength : MD 5,700 psi per ASTM D-882, TD 6,500 psi
Tear strength : MD 3.0 lbs per ASTM D-1004, TD 2.2 lbs
Chemical Properties :
Corrosion : No effect on aluminum, copper, silver, Sn-Pb coated foil, stainless steel, low carbon steel
Polycarbonate Compatible : Yes
No Amines or N-Octanoic Acid : Not present
Heat Sealing Conditions :
Temperature : 375-400°F
Time : 0.5 - 4.5 seconds
Pressure : Minimum 60 PSI