SCS 19290 - Digital Surface Resistance Meter Kit

Description
SCS 19290 - Digital Surface Resistance Meter Kit

The Desco 19290 Digital Surface Resistance Meter Kit is an instrument designed to measure resistance point-to-point (Rtt) or surface to ground (Rtg).

Test functions include:

• Resistance measurement accuracy of ±10% (±20% accuracy for 1 x 10¹² ohms and greater)
• Resistance range of <1 x 10³ ohms to >1 x 10¹² ohms
• Under load voltages of 10 and 100 volts ±5% Electrification period of approximately 15 seconds.

The Digital Surface Resistance Meter also measures ambient temperature and relative humidity. Up to 100 measurements may be stored and recalled from the meter's internal memory. This includes the resistance value, temperature, relative humidity and test voltage at the time of the measurement.

Large OLED Display
Displays resistance mantissa and exponent, temperature, relative humidity and test voltage

Internal Memory
Stores and recalls up to 100 measurements. Captures resistance, temperature, humidity and test voltage.

Measurement Stability Modes
Sets the 15-second electrification period for test requirements

Electrode Spacers
Spaces the 5 lbs. electrodes to 10 and 36 inches for resistance point-to-point (Rtt) measurement requirements of ANSI/ESD S.1 and ANSI/ESD S4.1

Measurement Location Labels (Pack of 25)
Labels and tracks areas and materials measured for surface resistance

Digital Compliance Verification Surface Resistance Meter Kit
Measures resistance point-to-point (Rtt) and resistance-to-ground (Rtg) of worksurfaces, flooring systems, garments, packaging, and other materials in accordance with ESD Association documents: ESD TR53, ANSI/ESD S4.1, ANSI/ESD S7.1, ANSI/ESD STM97.1 and others

Resistance Range: 1.0 x 10³ to 1.0 x 10¹² Ohms
Determines if a surface is conductive, dissipative or insulative for ESD control applications in electronics manufacturing or handling environments

Under Load Test Voltages (10V or 100V ±5%)
Meets ANSI/ESD S20.20 resistance testing requirements for product qualification and compliance verification

50005 Concentric Ring Probe Accessory
Measures surface resistance per ANSI/ESD STM11.11 and volume resistance per ANSI/ESD STM11.12 of planar material

19295 Handheld Electrode Accessory
Meets resistance measurement requirements of TR53, ANSI/ESD STM97.1 and other documents

NIST Calibrated with Certificate Included
Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology.

Kit Includes:

• 1 Digital Surface Resistance Meter
• 2 Test Leads, 5' Length
• 2 5 lbs. Electrodes
• 1 Electrode Spacer, 10"
• 1 Electrode Spacer, 36"
• 4 AA Alkaline Batteries
• 1 Ground Plug Adapter
• 1 Gator Clip
• 25 Measurement Location Labels
• 1 Plastic Carrying Case
• 1 Certificate of Calibration