Scotch Contractor Grade Masking Tape 2020-18AP, 0.70 in x 60.1 yd (18 mm x 55 m)

Description
Scotch Contractor Grade Masking Tape 2020-18AP, 0.70 in x 60.1 yd (18 mm x 55 m)

• Use-On Surfaces: Designed for use on vinyl, carpet, metal, and plastic
• Days Clean Removal: 3-day interior and 1-day exterior clean removal leaves behind no damage or sticky residue
• Adhesive Level: Strong
• Size: 0.70 in. x 60.1 yd
• Pack Out: 1 Roll/Pack

Sustainability 
Made from 50% renewable resources; adhesive made with natural rubber; tape made in a site certified for energy management (iso 50001 certified); core made with 70% post-consumer waste

Tape Application Tips 
For great paint results make sure the surface is clean, dry and dust-free so that the tape sticks properly. Next, apply the tape onto the surface while pressing down firmly as you go. And lastly, let the tape set for about 30 to 60 minutes before painting.

Tape Removal Tips 
Wait until the paint is dry to the touch before removing the tape. Lift it up by slowly pulling it back on itself, then removing at a 45-degree angle.

Scotch Contractor Grade Masking Tape is a general purpose masking tape designed for use on non-damageable surfaces. Use on vinyl, carpet, metal, and plastic for the protection you need to get the job done. Scotch Contractor Grade Masking Tape holds to surfaces for up to 3 days and then removes easily without leaving any sticky residue behind.

Product ID: 3M 2020-18AP UPC: 00-021200-69476-9, 00021200694769 Stock ID: 70-0091-0373-3, 70009103733, 7100186349