3M PPS Type H/O Pressure Cup, 16124, Large (28 fl oz, 828 mL), 1 per box

Description
3M PPS Type H/O Pressure Cup, 16124, Large (28 fl oz, 828 mL), 1 per box

• Pressurized hard cups and collars use with 3M PPS (Legacy) paint preparation system
• Designed to efficiently spray thick, high viscosity liquids
• 3M PPS is an all-in-one disposable solution for measuring, mixing, filtering, and spraying of paint materials
• System enables the painter to consistently spray at 90° to the part, no matter the part orientation (even upside down)
• The all-in-one solution reduces the chance of outside contamination and reduces paint consumption
• PPS reduces cleaning solvent consumption up to 70% and reduces prep and clean-up time by 50%
• System delivers improved quality, lower material cost, less solvent consumption, improved productivity, less mess and easier use

3M PPS Type H/O Pressure Cup is a pressurized (H/O) hard cup and collar set that supports and holds 3M PPS flexible liner used in the 3M PPS (Legacy) paint preparation system. This product is intended for use in place of metal cups on most pressure spray guns. Available sizes include Mini - 6 oz. and Large - 28 oz. cups.

Cup and Collars Support Liners
3M PPS Type H/O Pressure Cup is a component set for use with the 3M PPS (Legacy) paint preparation system. 3M PPS is a complete painting system that allows the painter to measure, mix, filter, and spray paint materials. These items are hard plastic cups and collars that provide support for 3M PPS flexible liners. These pressurized cups are often used as replacements for metal cups commonly found on many automotive paint spray guns. Our reusable pressurized PPS Type H/O Pressure Cups excel at applying high viscosity coatings. Type H/O cups effectively work with thick liquid materials that require pressure assist in gravity-filled delivery systems.

Advantages of the 3M PPS System
Unlike conventional paint cup systems, our 3M PPS eliminates the need for mixing paint in additional paint mix cups and then transferring the paint through a separate filter into a paint reservoir. This is an important advantage because waste occurs every time that a user transfers paint through mixing cups and filters. With PPS, you place the disposable liner within the re-usable PPS Cup. Then simply mix the paint in the PPS disposable liner, snap the disposable lid (with the pre-welded filter) in place and attach the locking collar to complete the PPS System. With just these few simple steps, you're ready to start spraying.

Your Spray Gun Functions at any Angle, Even Upside Down
PPS allows the painter to spray consistently 90° to the part, no matter how the part is positioned. This makes material transfer more consistent, limits paint overspray and lowers paint consumption. Because PPS is a closed system, you can operate in any orientation -  i.e. 360 degrees.

Clean Up is a Breeze and Uses Less Solvent
After spraying, the painter can use a sealing plug to seal and protect paint materials or simply discard disposable lid and liner, leaving only the adapter and spray gun to clean. Discard the disposable lid and liner in the appropriate approved waste containers specified by the paint manufacturer (or local government requirements). Use a small amount of solvent for cleaning the spray gun and the PPS adapter. With this disposable paint system, shops are often experiencing a 70% reduction in cleaning solvents, which means solvent cleaning savings and solvent disposal savings. Most guns can be cleaned with less than 3 oz. of solvent.

Product ID: 3M 16124 UPC: 00-051131-16124-5, 00051131161245 Stock ID: 60-4550-2941-7, 60455029417, 7000119668