3M Motor Lead Pigtail Splice 5318, 5-8 kV, Non-Shielded, 2 AWG-250 kcmil (feeder), 2 AWG-250 kcmil (motor lead), 1 per case
Description
3M Motor Lead Pigtail Splice 5318, 5-8 kV, Non-Shielded, 2 AWG-250 kcmil (feeder), 2 AWG-250 kcmil (motor lead), 1 per case
3M Motor Lead Pigtail Splice 5318, 5-8 kV, Non-Shielded, 2 AWG-250 kcmil (feeder), 2 AWG-250 kcmil (motor lead), 1 per case
Each kit makes three splices. Lugs not included in kits. Feeder of 1/0 AWG-250 kcmil (60-120 sq mm), motor lead 2 AWG-250 kcmil (35-120 sq mm). These kits are designed to be used with copper compression, one- or two-hole lugs. After being crimped onto the cables, the lugs are bolted together in a pigtail configuration, then insulated and sealed with the 3M Motor Lead Splicing Kit. Each kit contains all the necessary materials (except lugs) needed to make three splices. The lugs must be purchased separately. 3M Scotchlok 30000 Series copper compression lugs, or other UL listed copper lugs, can be used.
Product ID: 3M 5318 UPC: 00-054007-08315-3, 00054007083153 Stock ID: 80-6107-3548-4, 80610735484
Product ID : 5318
Connection Type : Pigtail (Non-Shielded)
Insulation Outside Diameter Range : 0.53-0.88 in
Insulation Outside Diameter Range (mm) : 13.5-22.4 mm
Lug Length : 11.0 in
Lug Length (cm) : 27.94 cm
Maximum Bolt Length : 1-1/4 in
Maximum Bolt Length (mm) : 31.8 mm
Range Feeder Cable (AWG & kcmil) : 0-250
Range Motor Lead (AWG & kcmil) : 2-250
Voltage : 5/8 kV
Units per Pallet : 160 Kit
Harmonizing Code : 8546900000
ECCN : EAR99
Connection Type : Pigtail (Non-Shielded)
Insulation Outside Diameter Range : 0.53-0.88 in
Insulation Outside Diameter Range (mm) : 13.5-22.4 mm
Lug Length : 11.0 in
Lug Length (cm) : 27.94 cm
Maximum Bolt Length : 1-1/4 in
Maximum Bolt Length (mm) : 31.8 mm
Range Feeder Cable (AWG & kcmil) : 0-250
Range Motor Lead (AWG & kcmil) : 2-250
Voltage : 5/8 kV
Units per Pallet : 160 Kit
Harmonizing Code : 8546900000
ECCN : EAR99