3M AccuGlide LHB Taping Head, 2 in, Upper, 1 per case

Description
3M AccuGlide LHB Taping Head, 2 in, Upper, 1 per case

• Built for applying sealing tapes to low-height cases
• Can be set up for leading and trailing tape legs as short as 2” for smooth, non-overlapping tape application and lower material costs
• Operates at conveyor speeds up to 80 ft. per minute
• Curvilinear design applies minimal pressure to cases for smooth application and throughput
• For use with 3M automated equipment and Scotch® box sealing tapes

Our 3M AccuGlide LHB Upper/Lower Taping Heads are designed specifically for applying Scotch® box sealing tape to low-height boxes. For use at conveyor speeds of up to 80 ft. per minute, this low-impact tape head can be set up to apply tape legs as short as 2" (1-3/8" adjustable). It features curvilinear design that exerts minimal pressure on the cases, promoting smooth, damage-free production.

Easy and Accurate Case Sealing for Low-Height Boxes
Built for smooth, accurate SRC sealing tape application with minimal downtime using automated case sealers, 3M AccuGlide LHB Upper/Lower Taping Heads can be set up to apply tape in shorter tape legs to low-height boxes. These taping heads feature side frame settings that let users apply tape legs as short as 2” to achieve smoother, non-overlapping results and save money on boxing tape.  This complements a full range of taping head features, including a constant tension roller with one-way clutch, spring-driven buffing rollers and a fully-adjustable tape drum with friction brake to prevent overtravel, for smooth, accurate C-clip tape application. 3M AccuGlide Taping Heads feature a curvilinear design that applies sealing tape securely and at low impact to help protect even lightweight cartons and contents. Designed for the 3M AccuGlide Taping Head seal center seams at speeds of up to 30 cases per minute, upper and lower feed.

Recommended Applications

• Applying short 2" tape legs
• Up to 80 ft. per minute case speed
• Used with 3M-Matic Case Sealers

3M AccuGlide Taping Process
3M AccuGlide Taping Heads are usually used with 3M-Matic Case Sealers but can also be used in converting other case sealers or in custom equipment. A regular slotted container (RSC) is placed on the conveyor and pushed onto the drive belts of a 3M-Matic Case Sealer, which convey the box into the 3M AccuGlide Taping Head. The 3M AccuGlide Taping Heads applies Scotch® pressure sensitive film box sealing tape at the leading end of the box continuing along the center seam to the trailing end. The taping head also contains a blade which cuts the tape and a back roller that applies it firmly to the back end of the box. Taping heads usually function in pairs to tape two seams of a case. When they tape the top and bottom, taping heads are mounted in an upper and lower configuration. Taping heads can also be mounted for sealing a case lying on its side.

Designed for use with the following 3M-Matic Case Sealers:

• 3M-Matic Case Sealer 800rf
• 3M-Matic Case Sealer 800af
• 3M-Matic Case Sealer 800a
• 3M-Matic Case Sealer 800r
• 3M-Matic Case Sealer 700a
• 3M-Matic Case Sealer 700r
• 3M-Matic Case Sealer 200a
• 3M-Matic Case Sealer 800ab

Product ID: 3M 2+ UPC: 00-051115-31372-1, 00051115313721 Stock ID: 70-0064-3408-1, 70006434081, 7000049258